Machinery Home | Single-Blade Saws | Multi-Blade Saws
EASY-CUT 700/838 SAW - Automatic Single Blade Cross-Cut Saw
From £1080 per month *
The MiTek Easy-Cut 700/838 saw is an advanced single blade saw with a three or four axis controller. The cutting blade is 700mm diameter and can be supplied as a fixed 90 degree through 360 degrees or a minimum 38 degree tilt function. The four axis, fully automatic and networked controller allows the operator to program the cuts and control angle, centre line and length; with the three axis and the additional tilt angle with the four axis.
6.0m infeed conveyor with back rail, unpowered rollers 400mm long,76mm dia @ 500mm centres
7.5m outfeed conveyor with guide rail, unpowered rollers 400mm long, 76mm dia @ 500mm centres
Automatic length stop
Twin vertical clamps
Four horizontal clamps
Two powered out/in rollers
M3 HIGH SPEED LINEAR SAW
From £2,436 per month *
The M3 saw is a new, state of the art, fully automated, single blade linear saw. High production capacity for the truss and timber frame industry. Servo-motors are used exclusively to set new standards for speed and accuracy.
More efficient than traditional 4 blade saws
Run by a single operator
Sets a new standard for health & safety: the saw chamber is totally enclosed, no saw dust, reduced noise and low electrical consumption
Advanced timber optimization software reduces timber consumption
Pieces from 100 to 6500 mm long with a thickness of up to 80 mm and depth up to 300 mm can be cut
No cutting limitations. The saw will cut scarf cuts of any length, single or double bevels, bird mouths, notches and short wedges
* Prices given are exclusive of taxes and subject to our terms and conditions.