Sorry there are no places left for this event.
BEGIN:VCALENDAR VERSION:2.0 PRODID:-//MiTek UK and Ireland - ECPv4.9.2//NONSGML v1.0//EN CALSCALE:GREGORIAN METHOD:PUBLISH X-WR-CALNAME:MiTek UK and Ireland X-ORIGINAL-URL:https://www.mitek.co.uk X-WR-CALDESC:Events for MiTek UK and Ireland BEGIN:VEVENT DTSTART;TZID=Europe/London:20190605T090000 DTEND;TZID=Europe/London:20190606T170000 DTSTAMP:20190521T231003 CREATED:20190201T162152Z LAST-MODIFIED:20190517T143546Z UID:5143-1559725200-1559840400@www.mitek.co.uk SUMMARY:PAMIR Roof Level 1 Workshop DESCRIPTION:Part 2 – Workshop Session (2 Days) \nThis two-day follow–up course is designed to expand each users’ ongoing ability to use and understand the Pamir program\, via a series of assisted exercises\, supported question and answer sessions and feature demonstrations. A summary assessment is used to gauge the attendees’ understanding of the program. \n\nFollow up training\nAnswers to feedback questions forwarded during week 2 onsite usage.\nTips\, tools and did you know sessions\nWorkshop sessions on live jobs\nSummary assessment\n\n URL:https://www.mitek.co.uk/training-session/pamir-roof-level-1-workshop-2/ LOCATION:MiTek UK\, Grazebrook Industrial Park\, Dudley\, West Midlands\, DY2 0XW\, United Kingdom GEO:52.4971915;-2.0955133 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MiTek UK Grazebrook Industrial Park Dudley West Midlands DY2 0XW United Kingdom;X-APPLE-RADIUS=500;X-TITLE=Grazebrook Industrial Park:geo:-2.0955133,52.4971915 ORGANIZER;CN="Culver%20Eddy":MAILTO:ceddy@mitek.co.uk END:VEVENT BEGIN:VEVENT DTSTART;TZID=Europe/London:20190612T090000 DTEND;TZID=Europe/London:20190612T170000 DTSTAMP:20190521T231003 CREATED:20190201T161049Z LAST-MODIFIED:20190416T150724Z UID:5139-1560330000-1560358800@www.mitek.co.uk SUMMARY:PAMIR Introduction for Posi-Joist DESCRIPTION:Pamir Introduction for Posi:\nScope: This one-day introductory course caters for those having little or no experience in running the MiTek software suite. Its aim is to cover in general terms\, all of aspects associated with using Pamir for detailing Posi Joist in floor situations. The course is delivered at a pace where no student is left behind therefore; existing intermediate to advanced Pamir users should not attend. Continuous assessment is used in place of a summary test to gauge the attendees understanding of the points covered. \nDelivery: In-house \nPrerequisites: Minimum of One months’ prior hands on design experience. \nContent: \n\nUser interface and navigation\n Control\, drawing and modification tools\nProject setup\nBuilding entry\nFloor surface and opening entry\nPosi frame entry and modification\nPosi frame design basics\nCreating output\n\n URL:https://www.mitek.co.uk/training-session/pamir-introduction-for-posi-joist-2/ LOCATION:MiTek UK\, Grazebrook Industrial Park\, Dudley\, West Midlands\, DY2 0XW\, United Kingdom GEO:52.4971915;-2.0955133 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MiTek UK Grazebrook Industrial Park Dudley West Midlands DY2 0XW United Kingdom;X-APPLE-RADIUS=500;X-TITLE=Grazebrook Industrial Park:geo:-2.0955133,52.4971915 ORGANIZER;CN="Culver%20Eddy":MAILTO:ceddy@mitek.co.uk END:VEVENT BEGIN:VEVENT DTSTART;TZID=Europe/London:20190613T090000 DTEND;TZID=Europe/London:20190613T170000 DTSTAMP:20190521T231003 CREATED:20190201T161328Z LAST-MODIFIED:20190416T150631Z UID:5140-1560416400-1560445200@www.mitek.co.uk SUMMARY:Posi 1 Day DESCRIPTION:Pamir Posi 1 Day: \nScope: This one-day course is intended for users who are already familiar with the MiTek MBA and Pamir software. Its aim is to cover in general terms all aspects associated with the usage of Posi Joist in floor situations with coverage of only the specific software tools required. Continuous assessment is used in place of a summary test to gauge the attendees understanding of the points covered. \nDelivery: In-house \nPrerequisites: Minimum of three months’ prior hands on experience using the Pamir software or successful completion of the Pamir Introduction for Posi course. \nContent: \n\nUnderstanding the product\nFloor construction considerations\nPosi related project setup\nSoftware overview\nBuilding entry with associated floor surfaces\nCreating standard openings and framing openings for future lift shafts\nUsing Interactive automatic framing with splits\nAdding and editing manual framing\nChanging end details and interior via the build and wall options\nModify opening supports and framing\nCreate edge framing (ring beams\, rim boards\, packers and noggins)\nMatch webbing across joists\nEdit internal details and webbing for improved engineering\nDesign joists and review the results\nApply additional frame and layout manual loads\nReview additional loading to meet sound and fire proofing requirements\nManually add ancillary items such as strong backs\, partition and restraint noggins\nReview the Posi Joist manufacturing standard\, output and installation options\nPosi specific engineering reports\nUsing Posi in roof situations (time permitting)\nTips\, tools and did you know sessions\n\n URL:https://www.mitek.co.uk/training-session/posi-1-day-2/ LOCATION:MiTek UK\, Grazebrook Industrial Park\, Dudley\, West Midlands\, DY2 0XW\, United Kingdom GEO:52.4971915;-2.0955133 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MiTek UK Grazebrook Industrial Park Dudley West Midlands DY2 0XW United Kingdom;X-APPLE-RADIUS=500;X-TITLE=Grazebrook Industrial Park:geo:-2.0955133,52.4971915 ORGANIZER;CN="Culver%20Eddy":MAILTO:ceddy@mitek.co.uk END:VEVENT BEGIN:VEVENT DTSTART;TZID=Europe/London:20190614T100000 DTEND;TZID=Europe/London:20190614T120000 DTSTAMP:20190521T231003 CREATED:20190201T161637Z LAST-MODIFIED:20190416T150918Z UID:5141-1560506400-1560513600@www.mitek.co.uk SUMMARY:PAMIR EC5 Design DESCRIPTION:Pamir EC5 Design: \nScope: The aim of this short broad based online course (duration approx. 120 minutes) is to cover all of the setup and software related issues relative to EC5. \nDelivery: Online \nPrerequisites: A basic understanding of truss design and loading using the Pamir software. \nThis course will be not be assessed due to online delivery. \nContent: \n\nWhat is EC5\nEC5 Loading\nManual loads application by load type using worked examples\nPamir design results\nEC5 Calculations\nSelecting factored and unfactored reactions\nAdditional information\nQ&A\n\n URL:https://www.mitek.co.uk/training-session/pamir-ec5-design-2/ LOCATION:Hosted Online\, West Midlands ORGANIZER;CN="Culver%20Eddy":MAILTO:ceddy@mitek.co.uk END:VEVENT BEGIN:VEVENT DTSTART;TZID=Europe/London:20190702T090000 DTEND;TZID=Europe/London:20190704T170000 DTSTAMP:20190521T231003 CREATED:20190416T151548Z LAST-MODIFIED:20190416T151548Z UID:5671-1562058000-1562259600@www.mitek.co.uk SUMMARY:PAMIR Roof Level 1 DESCRIPTION:Pamir Roof Level One: \nScope: This two-part introductory course\, spread over 3 weeks is designed for those having little or no experience in running the MiTek software suite. Continuous assessment is used to gauge the attendees understanding of the points being covered. \nDelivery: In-house \nPrerequisites: Completion of the Introduction to Trusses course or a minimum of three months’ prior hands on design experience. \nContent: – Part 1 – This 3 day hands-on course takes the user through all of the key features within the Pamir Program. \n\nMBA\, Navigation and control options\nLinking from MBA\, Understanding the user interface and using the control options.\nFull program overview\nBuilding\, surface and frame entry\, 2D and 3D interaction\, frame design and output.\nLayout view.\nBuilding entry and modification\nSurface entry and modification including raised ties and dormers\nAutomatic framing tools\nManual frame entry and modification\nAttic roof entry with openings.\nCreating section views to assist detailing and design.\nFrame view\nFrame selection\nDesign principles and results.\nEditing single and multiple frames for design and production.\nManual roof framing and reinforcement utilising 2D\, 3D and frame view interactions.\nAdding ancillary items\nAdding and modifying\, automatic and manual bracing and metalwork.\nCreating output\nCreating working drawings via templates\nAdding details using general drawing tools.\nExporting from Pamir using a range of formats (PDF\, DXF\, DWG and viewer files).\n\n1 – 2 weeks’ onsite program usage – Minimum 8 hours’ hands-on usage on the software. \n URL:https://www.mitek.co.uk/training-session/pamir-roof-level-1/ LOCATION:MiTek UK\, Grazebrook Industrial Park\, Dudley\, West Midlands\, DY2 0XW\, United Kingdom GEO:52.4971915;-2.0955133 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MiTek UK Grazebrook Industrial Park Dudley West Midlands DY2 0XW United Kingdom;X-APPLE-RADIUS=500;X-TITLE=Grazebrook Industrial Park:geo:-2.0955133,52.4971915 ORGANIZER;CN="Culver%20Eddy":MAILTO:ceddy@mitek.co.uk END:VEVENT BEGIN:VEVENT DTSTART;TZID=Europe/London:20190710T090000 DTEND;TZID=Europe/London:20190710T170000 DTSTAMP:20190521T231003 CREATED:20190201T162952Z LAST-MODIFIED:20190416T151145Z UID:5144-1562749200-1562778000@www.mitek.co.uk SUMMARY:PAMIR Introduction for Posi DESCRIPTION:Pamir Introduction for Posi:\nScope: This one-day introductory course caters for those having little or no experience in running the MiTek software suite. Its aim is to cover in general terms\, all of aspects associated with using Pamir for detailing Posi Joist in floor situations. The course is delivered at a pace where no student is left behind therefore; existing intermediate to advanced Pamir users should not attend. Continuous assessment is used in place of a summary test to gauge the attendees understanding of the points covered. \nDelivery: In-house \nPrerequisites: Minimum of One months’ prior hands on design experience. \nContent: \n\nUser interface and navigation\n Control\, drawing and modification tools\nProject setup\nBuilding entry\nFloor surface and opening entry\nPosi frame entry and modification\nPosi frame design basics\nCreating output\n\n URL:https://www.mitek.co.uk/training-session/pamir-introduction-for-posi-3/ LOCATION:MiTek UK\, Grazebrook Industrial Park\, Dudley\, West Midlands\, DY2 0XW\, United Kingdom GEO:52.4971915;-2.0955133 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MiTek UK Grazebrook Industrial Park Dudley West Midlands DY2 0XW United Kingdom;X-APPLE-RADIUS=500;X-TITLE=Grazebrook Industrial Park:geo:-2.0955133,52.4971915 ORGANIZER;CN="Culver%20Eddy":MAILTO:ceddy@mitek.co.uk END:VEVENT BEGIN:VEVENT DTSTART;TZID=Europe/London:20190711T090000 DTEND;TZID=Europe/London:20190711T170000 DTSTAMP:20190521T231003 CREATED:20190201T163121Z LAST-MODIFIED:20190416T151340Z UID:5145-1562835600-1562864400@www.mitek.co.uk SUMMARY:Posi 1 Day DESCRIPTION:Pamir Posi 1 Day: \nScope: This one-day course is intended for users who are already familiar with the MiTek MBA and Pamir software. Its aim is to cover in general terms all aspects associated with the usage of Posi Joist in floor situations with coverage of only the specific software tools required. Continuous assessment is used in place of a summary test to gauge the attendees understanding of the points covered. \nDelivery: In-house \nPrerequisites: Minimum of three months’ prior hands on experience using the Pamir software or successful completion of the Pamir Introduction for Posi course. \nContent: \n\nUnderstanding the product\nFloor construction considerations\nPosi related project setup\nSoftware overview\nBuilding entry with associated floor surfaces\nCreating standard openings and framing openings for future lift shafts\nUsing Interactive automatic framing with splits\nAdding and editing manual framing\nChanging end details and interior via the build and wall options\nModify opening supports and framing\nCreate edge framing (ring beams\, rim boards\, packers and noggins)\nMatch webbing across joists\nEdit internal details and webbing for improved engineering\nDesign joists and review the results\nApply additional frame and layout manual loads\nReview additional loading to meet sound and fire proofing requirements\nManually add ancillary items such as strong backs\, partition and restraint noggins\nReview the Posi Joist manufacturing standard\, output and installation options\nPosi specific engineering reports\nUsing Posi in roof situations (time permitting)\nTips\, tools and did you know sessions\n\n URL:https://www.mitek.co.uk/training-session/posi-1-day-2-3/ LOCATION:MiTek UK\, Grazebrook Industrial Park\, Dudley\, West Midlands\, DY2 0XW\, United Kingdom GEO:52.4971915;-2.0955133 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MiTek UK Grazebrook Industrial Park Dudley West Midlands DY2 0XW United Kingdom;X-APPLE-RADIUS=500;X-TITLE=Grazebrook Industrial Park:geo:-2.0955133,52.4971915 ORGANIZER;CN="Culver%20Eddy":MAILTO:ceddy@mitek.co.uk END:VEVENT BEGIN:VEVENT DTSTART;TZID=Europe/London:20190717T090000 DTEND;TZID=Europe/London:20190718T170000 DTSTAMP:20190521T231003 CREATED:20190201T163414Z LAST-MODIFIED:20190416T151717Z UID:5146-1563354000-1563469200@www.mitek.co.uk SUMMARY:PAMIR Roof Level 2 DESCRIPTION:Pamir Roof Level Two: \nScope: This is a two-day course for the intermediate to advanced truss designer who currently uses the MiTek Pamir software. The course is designed to increase productivity by covering a deeper range of program functions with particular attention being paid to set-up and advanced tools. \nDelivery: In-house \nPrerequisites: Minimum of six months’ prior hands on experience using the MiTek Pamir software. Continuous assessment is used in place of a summary test to gauge the attendees’ understanding of the points covered. \nContent: \n\nQ& A session – Questions required 1 week prior to course.\nUser controls and project setup\nGetting the most out of the user interface\nUnderstanding and configuring the defaults\nCustomising the defaults and template setting to speed up job entry\nCreate default templates and fabricators for future projects.\nDrawing and modification tools\nUtilising coordinate options\nUse snap options to speed up building entry\nCreate buildings from PDF drawings\nSurface tools.\nRoof insertion and profiling tools and options\nChecking and modifying roof surfaces\nLayout framing tools\nExploiting automated framing tools and build options\nLayout frame modification and labelling.\nAttic and raised tie framing.\nReview automatic and manual room creation options.\nCreating and managing openings.\nAttic framing and cut attic considerations.\nFrame review\, design and loading\nUtilising checking and design options.\nFixing failures and understanding results.\nApplying layout view and frame view loading.\nStandalone frame entry and frame modification.\nCreate and modifying standalone frames.\nCreating abnormal shapes.\nEditing frames for design and production.\nWorking with ancillary items\nUtilise bracing and metalwork options\nReview drawing tools\nCreating detailed output\nConfiguring layering\, drawing templates\, borders and notes to customise output\nUsing sections and bookmarks to create standard details.\nUsing viewports and schedules to enhance presentation.\nExporting from Pamir\nGenerating drawing viewer and 3D output files\n\n URL:https://www.mitek.co.uk/training-session/pamir-roof-level-2-2/ LOCATION:MiTek UK\, Grazebrook Industrial Park\, Dudley\, West Midlands\, DY2 0XW\, United Kingdom GEO:52.4971915;-2.0955133 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MiTek UK Grazebrook Industrial Park Dudley West Midlands DY2 0XW United Kingdom;X-APPLE-RADIUS=500;X-TITLE=Grazebrook Industrial Park:geo:-2.0955133,52.4971915 ORGANIZER;CN="Culver%20Eddy":MAILTO:ceddy@mitek.co.uk END:VEVENT BEGIN:VEVENT DTSTART;TZID=Europe/London:20190724T090000 DTEND;TZID=Europe/London:20190725T170000 DTSTAMP:20190521T231003 CREATED:20190416T151943Z LAST-MODIFIED:20190416T151943Z UID:5673-1563958800-1564074000@www.mitek.co.uk SUMMARY:PAMIR Roof Level 1 Workshop DESCRIPTION:Part 2 – Workshop Session (2 Days) \nThis two-day follow–up course is designed to expand each users’ ongoing ability to use and understand the Pamir program\, via a series of assisted exercises\, supported question and answer sessions and feature demonstrations. A summary assessment is used to gauge the attendees’ understanding of the program. \n\nFollow up training\nAnswers to feedback questions forwarded during week 2 onsite usage.\nTips\, tools and did you know sessions\nWorkshop sessions on live jobs\nSummary assessment\n\n URL:https://www.mitek.co.uk/training-session/pamir-roof-level-1-workshop/ LOCATION:MiTek UK\, Grazebrook Industrial Park\, Dudley\, West Midlands\, DY2 0XW\, United Kingdom GEO:52.4971915;-2.0955133 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MiTek UK Grazebrook Industrial Park Dudley West Midlands DY2 0XW United Kingdom;X-APPLE-RADIUS=500;X-TITLE=Grazebrook Industrial Park:geo:-2.0955133,52.4971915 ORGANIZER;CN="Culver%20Eddy":MAILTO:ceddy@mitek.co.uk END:VEVENT BEGIN:VEVENT DTSTART;TZID=Europe/London:20190903T090000 DTEND;TZID=Europe/London:20190905T170000 DTSTAMP:20190521T231003 CREATED:20190416T153611Z LAST-MODIFIED:20190416T153611Z UID:5675-1567501200-1567702800@www.mitek.co.uk SUMMARY:PAMIR Roof Level 1 DESCRIPTION:Pamir Roof Level One: \nScope: This two-part introductory course\, spread over 3 weeks is designed for those having little or no experience in running the MiTek software suite. Continuous assessment is used to gauge the attendees understanding of the points being covered. \nDelivery: In-house \nPrerequisites: Completion of the Introduction to Trusses course or a minimum of three months’ prior hands on design experience. \nContent: – Part 1 – This 3 day hands-on course takes the user through all of the key features within the Pamir Program. \n\nMBA\, Navigation and control options\nLinking from MBA\, Understanding the user interface and using the control options.\nFull program overview\nBuilding\, surface and frame entry\, 2D and 3D interaction\, frame design and output.\nLayout view.\nBuilding entry and modification\nSurface entry and modification including raised ties and dormers\nAutomatic framing tools\nManual frame entry and modification\nAttic roof entry with openings.\nCreating section views to assist detailing and design.\nFrame view\nFrame selection\nDesign principles and results.\nEditing single and multiple frames for design and production.\nManual roof framing and reinforcement utilising 2D\, 3D and frame view interactions.\nAdding ancillary items\nAdding and modifying\, automatic and manual bracing and metalwork.\nCreating output\nCreating working drawings via templates\nAdding details using general drawing tools.\nExporting from Pamir using a range of formats (PDF\, DXF\, DWG and viewer files).\n\n1 – 2 weeks’ onsite program usage – Minimum 8 hours’ hands-on usage on the software. \n URL:https://www.mitek.co.uk/training-session/pamir-roof-level-1-3/ LOCATION:MiTek UK\, Grazebrook Industrial Park\, Dudley\, West Midlands\, DY2 0XW\, United Kingdom GEO:52.4971915;-2.0955133 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MiTek UK Grazebrook Industrial Park Dudley West Midlands DY2 0XW United Kingdom;X-APPLE-RADIUS=500;X-TITLE=Grazebrook Industrial Park:geo:-2.0955133,52.4971915 ORGANIZER;CN="Diane%20Pearson":MAILTO:dpearson@mitek.co.uk END:VEVENT BEGIN:VEVENT DTSTART;TZID=Europe/London:20190911T090000 DTEND;TZID=Europe/London:20190911T170000 DTSTAMP:20190521T231003 CREATED:20190416T153850Z LAST-MODIFIED:20190416T153850Z UID:5679-1568192400-1568221200@www.mitek.co.uk SUMMARY:PAMIR Introduction to Posi-Joist DESCRIPTION:Pamir Introduction for Posi:\nScope: This one-day introductory course caters for those having little or no experience in running the MiTek software suite. Its aim is to cover in general terms\, all of aspects associated with using Pamir for detailing Posi Joist in floor situations. The course is delivered at a pace where no student is left behind therefore; existing intermediate to advanced Pamir users should not attend. Continuous assessment is used in place of a summary test to gauge the attendees understanding of the points covered. \nDelivery: In-house \nPrerequisites: Minimum of One months’ prior hands on design experience. \nContent: \n\nUser interface and navigation\n Control\, drawing and modification tools\nProject setup\nBuilding entry\nFloor surface and opening entry\nPosi frame entry and modification\nPosi frame design basics\nCreating output\n\n URL:https://www.mitek.co.uk/training-session/pamir-introduction-to-posi-joist/ LOCATION:MiTek UK\, Grazebrook Industrial Park\, Dudley\, West Midlands\, DY2 0XW\, United Kingdom GEO:52.4971915;-2.0955133 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MiTek UK Grazebrook Industrial Park Dudley West Midlands DY2 0XW United Kingdom;X-APPLE-RADIUS=500;X-TITLE=Grazebrook Industrial Park:geo:-2.0955133,52.4971915 ORGANIZER;CN="Culver%20Eddy":MAILTO:ceddy@mitek.co.uk END:VEVENT BEGIN:VEVENT DTSTART;TZID=Europe/London:20190912T090000 DTEND;TZID=Europe/London:20190912T170000 DTSTAMP:20190521T231003 CREATED:20190416T154000Z LAST-MODIFIED:20190416T154000Z UID:5681-1568278800-1568307600@www.mitek.co.uk SUMMARY:PAMIR Posi-Joist 1 Day DESCRIPTION:\n\nPAMIR Posi 1 Day: \nScope: This one-day course is intended for users who are already familiar with the MiTek MBA and Pamir software. Its aim is to cover in general terms all aspects associated with the usage of Posi Joist in floor situations with coverage of only the specific software tools required. Continuous assessment is used in place of a summary test to gauge the attendees understanding of the points covered. \nDelivery: In-house \nPrerequisites: Minimum of three months’ prior hands on experience using the Pamir software or successful completion of the Pamir Introduction for Posi course. \nContent: \n\nUnderstanding the product\nFloor construction considerations\nPosi related project setup\nSoftware overview\nBuilding entry with associated floor surfaces\nCreating standard openings and framing openings for future lift shafts\nUsing Interactive automatic framing with splits\nAdding and editing manual framing\nChanging end details and interior via the build and wall options\nModify opening supports and framing\nCreate edge framing (ring beams\, rim boards\, packers and noggins)\nMatch webbing across joists\nEdit internal details and webbing for improved engineering\nDesign joists and review the results\nApply additional frame and layout manual loads\nReview additional loading to meet sound and fire proofing requirements\nManually add ancillary items such as strong backs\, partition and restraint noggins\nReview the Posi Joist manufacturing standard\, output and installation options\nPosi specific engineering reports\nUsing Posi in roof situations (time permitting)\nTips\, tools and did you know sessions\n\n\n\n+ GOOGLE CALENDAR+ ICAL EXPORT\n URL:https://www.mitek.co.uk/training-session/pamir-posi-joist-1-day/ LOCATION:MiTek UK\, Grazebrook Industrial Park\, Dudley\, West Midlands\, DY2 0XW\, United Kingdom GEO:52.4971915;-2.0955133 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MiTek UK Grazebrook Industrial Park Dudley West Midlands DY2 0XW United Kingdom;X-APPLE-RADIUS=500;X-TITLE=Grazebrook Industrial Park:geo:-2.0955133,52.4971915 ORGANIZER;CN="Culver%20Eddy":MAILTO:ceddy@mitek.co.uk END:VEVENT BEGIN:VEVENT DTSTART;TZID=Europe/London:20190913T100000 DTEND;TZID=Europe/London:20190913T120000 DTSTAMP:20190521T231003 CREATED:20190416T154202Z LAST-MODIFIED:20190416T154202Z UID:5683-1568368800-1568376000@www.mitek.co.uk SUMMARY:PAMIR EC5 Design - Online DESCRIPTION:Pamir EC5 Design: \nScope: The aim of this short broad based online course (duration approx. 120 minutes) is to cover all of the setup and software related issues relative to EC5. \nDelivery: Online \nPrerequisites: A basic understanding of truss design and loading using the Pamir software. \nThis course will be not be assessed due to online delivery. \nContent: \n\nWhat is EC5\nEC5 Loading\nManual loads application by load type using worked examples\nPamir design results\nEC5 Calculations\nSelecting factored and unfactored reactions\nAdditional information\nQ&A\n\n URL:https://www.mitek.co.uk/training-session/pamir-ec5-design-online/ LOCATION:Hosted Online\, West Midlands ORGANIZER;CN="Culver%20Eddy":MAILTO:ceddy@mitek.co.uk END:VEVENT BEGIN:VEVENT DTSTART;TZID=Europe/London:20190918T090000 DTEND;TZID=Europe/London:20190919T170000 DTSTAMP:20190521T231003 CREATED:20190416T153734Z LAST-MODIFIED:20190521T092337Z UID:5677-1568797200-1568912400@www.mitek.co.uk SUMMARY:PAMIR Roof Level 1 Workshop DESCRIPTION:Part 2 – Workshop Session (2 Days) \nThis two-day follow–up course is designed to expand each users’ ongoing ability to use and understand the Pamir program\, via a series of assisted exercises\, supported question and answer sessions and feature demonstrations. A summary assessment is used to gauge the attendees’ understanding of the program. \n\nFollow up training\nAnswers to feedback questions forwarded during week 2 onsite usage.\nTips\, tools and did you know sessions\nWorkshop sessions on live jobs\nSummary assessment\n\nSign Up \nOops! We could not locate your form. \nOops! We could not locate your form. \n URL:https://www.mitek.co.uk/training-session/pamir-roof-level-1-workshop-3/ LOCATION:MiTek UK\, Grazebrook Industrial Park\, Dudley\, West Midlands\, DY2 0XW\, United Kingdom GEO:52.4971915;-2.0955133 X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MiTek UK Grazebrook Industrial Park Dudley West Midlands DY2 0XW United Kingdom;X-APPLE-RADIUS=500;X-TITLE=Grazebrook Industrial Park:geo:-2.0955133,52.4971915 ORGANIZER;CN="Culver%20Eddy":MAILTO:ceddy@mitek.co.uk END:VEVENT END:VCALENDAR