
Events Search and Views Navigation
February 2022
MC03R Introduction to Pamir for Posi-Joist – Remote instructor led (220202)
Introduction to Pamir for Posi-Joist – Remote instructor led: Scope: This one-day remote online introductory course caters for those having little or no experience in running the MiTek software suite. Its aim is to cover in general terms, all of aspects associated with using Pamir for detailing Posi Joist in floor situations. The course is delivered at a pace where no student is left behind therefore; existing intermediate to advanced Pamir users should not attend. Continuous assessment is used in…
Find out more »MC04R Pamir Posi-Joist 1 Day – Remote instructor led (220203)
Pamir Posi-Joist 1 Day – Remote instructor led: Scope: This one-day course is intended for users who are already familiar with the MiTek MBA and Pamir software. Its aim is to cover in general terms all aspects associated with the usage of Posi Joist in floor situations with coverage of only the specific software tools required. Continuous assessment is used in place of a summary test to gauge the attendees understanding of the points covered. Delivery: Remote instructor led Prerequisites:…
Find out more »March 2022
MC02 Pamir Roof Level 1 – MiTek office (220322)
Pamir Roof Level 1 – MiTek office: Scope: This two-part introductory course, spread over 3 weeks is designed for those having little or no experience in running the MiTek software suite. Continuous assessment is used to gauge the attendees understanding of the points being covered. Delivery: At MiTek office Prerequisites: Completion of the Introduction to Trusses course or a minimum of three months’ prior hands on design experience. Content: – Part 1 – This 3 day hands-on course takes the…
Find out more »MC03 Introduction to Pamir for Posi-Joist – MiTek office (220329)
Introduction to Pamir for Posi-Joist – MiTek office: Scope: This one-day introductory course caters for those having little or no experience in running the MiTek software suite. Its aim is to cover in general terms, all of aspects associated with using Pamir for detailing Posi Joist in floor situations. The course is delivered at a pace where no student is left behind therefore; existing intermediate to advanced Pamir users should not attend. Continuous assessment is used in place of a…
Find out more »MC04 Pamir Posi-Joist 1 Day – MiTek office (220330)
Pamir Posi-Joist 1 Day – MiTek office: Scope: This one-day course is intended for users who are already familiar with the MiTek MBA and Pamir software. Its aim is to cover in general terms all aspects associated with the usage of Posi Joist in floor situations with coverage of only the specific software tools required. Continuous assessment is used in place of a summary test to gauge the attendees understanding of the points covered. Delivery: At MiTek office Prerequisites: Minimum…
Find out more »April 2022
MC02W Pamir Roof Level 1 Workshop – MiTek office (220412)
Pamir Roof Level 1 Workshop – MiTek office: Scope: This two-day follow–up course is designed to expand each users’ ongoing ability to use and understand the Pamir program, via a series of assisted exercises, supported question and answer sessions and feature demonstrations. A summary assessment is used to gauge the attendees’ understanding of the program. Delivery: At MiTek office Prerequisites: Completion of the Pamir Roof level 1 course (part 1) or a minimum of two weeks prior hands on Pamir…
Find out more »MC05 Pamir Roof Level 2 – MiTek office (220419)
MC05 Pamir Roof Level 2 – MiTek office: Scope: This is a two-day course for the intermediate to advanced truss designer who currently uses the MiTek Pamir software. The course is designed to increase productivity by covering a deeper range of program functions with particular attention being paid to set-up and advanced tools. Delivery: At MiTek office Prerequisites: Minimum of six months’ prior hands on experience using the MiTek Pamir software. Continuous assessment is used in place of a summary…
Find out more »MC06R PAMIR EC5 Design – Remote instructor led (220421)
PAMIR EC5 Design – Remote instructor led: Scope: The aim of this short broad based online course (duration approx. 120 minutes) is to cover all of the setup and software related issues relative to EC5. This course will be not be assessed due to online delivery. Delivery: Remote instructor led Prerequisites: 3 Months hands on Pamir software usage. Content: What is EC5 EC5 Loading Pamir design results EC5 Calculations Selecting factored and unfactored reactions Additional information Q&A
Find out more »May 2022
MC03 Introduction to Pamir for Posi-Joist – MiTek office (220511)
Introduction to Pamir for Posi-Joist – MiTek office: Scope: This one-day introductory course caters for those having little or no experience in running the MiTek software suite. Its aim is to cover in general terms, all of aspects associated with using Pamir for detailing Posi Joist in floor situations. The course is delivered at a pace where no student is left behind therefore; existing intermediate to advanced Pamir users should not attend. Continuous assessment is used in place of a…
Find out more »MC04 Pamir Posi-Joist 1 Day – MiTek office (220512)
Pamir Posi-Joist 1 Day – MiTek office: Scope: This one-day course is intended for users who are already familiar with the MiTek MBA and Pamir software. Its aim is to cover in general terms all aspects associated with the usage of Posi Joist in floor situations with coverage of only the specific software tools required. Continuous assessment is used in place of a summary test to gauge the attendees understanding of the points covered. Delivery: At MiTek office Prerequisites: Minimum…
Find out more »