General Course Information and Booking Process  

All bookings for training must be completed by the individual attending the selected course.
A pre-course questionnaire is used to assess and confirm each student’s suitability for the course being requested.

Any Instructor led training courses listed below provided by MiTek, will be delivered subject to a minimum demand of four attendees. We reserve the right to cancel scheduled online and at MiTek based courses if the minimum demand of four attendees is not met with 1 weeks’ notice and accordingly, we recommend that all bookings for accommodation, transport and flights are made on a flexible basis.

At MiTek office based courses are delivered at our offices in Dudley, using the current release general version of the MiTek software. MiTek will provide computers, notepads, refreshments and lunch each day during the training. Customers are responsible for travel, accommodation and other expenses. Each course will begin at 9:00am prompt and end at 5:00 p.m. Courses are currently limited to 12 people to maintain a good student instructor ratio. The dress code during training courses is casual.

Covid 19 Policy protocol for in-house training courses:

  • Please do not arrive at MiTek Dudley if you are feeling unwell or showing symptoms of Covid-19. Please contact the instructor by telephone or email to advise us of your situation.
  • If a guest becomes unwell, becomes symptomatic or receives a positive notification message or call during training, they will immediately terminate attendance of the course and will be safely escorted from the site. They will be advised to contact the NHS 111 Service or 0800 224488 to seek further instructions and guidance.
  • The wearing of face coverings on-site at MiTek Dudley is no longer a mandatory requirement and is optional.
  • Clean washing / toilet facilities are available for your use. Please follow Covid handwashing guidelines regularly.
  • Hand sanitisers and alcohol surface wipes are provided for your use. Please use them as appropriate.
  • You are encouraged to address any issues relating to these requirements, or any other issues you may have with your instructor.
  • This policy may change in accordance with future Government directives.

Online student led courses will be delivered via the MiTek web site using their web browser with additional downloadable content. This allows the student to access the course via their training portal and to learn at their own pace.

Remote instructor led courses will be delivered via the internet using, screen sharing software with 2-way verbal communications. To participate, students will require a minimum of two display monitor and 2-way online audio capabilities (we recommend the use of a headset). Courses are currently limited to 6 people based on instructor screen monitoring facilities.

Prerequisites: These requirements for each course are there to ensure all attendees arrive with the same minimum level of understanding of the topics being covered, thus allowing the course program to be followed.

Booking process: Review the general information for the desired course and use the “Book Now” button to open the detailed description and prerequisites. Confirm the course meets your needs and you meet the requirements then use the “Sign up” button to complete the pre-course student questionnaire and register for your place.  Note: The questionnaire is required by each instructor to confirm suitability and adjust the course content and delivery to the needs of those attending. If you require assistance for any part of the booking process please use the links to contact Culver Eddy or Diane Pearson at MiTek by email  or on the phone on 01384 451400.

 

— Student Led Mentor Assisted Courses —

MC01S Introduction to Trusses – Online student led

** PLEASE NOTE: Course date is for display purposes ONLY ** This student led course is an introduction to trussed rafters for those that are new to truss industry.  It uses a self paced online learning structure that is suitable for both designers and estimators. This course is a prerequisite to the MiTek Pamir roof  level one course. A summary test is used to gauge knowledge, understanding and ability to use the points covered. **Click "Book Now" for full course details**

Upcoming Course Dates

December 31 @ 12:00 am Book now

MC02S Pamir Roof Level 1 – Online student led

** PLEASE NOTE: Course date is for display purposes ONLY ** This student led course is intended for users who are already familiar with roof structures or that have completed either the MiTek or TRA Introduction to trusses course. Its aim is to cover all of the tools required within the Pamir software for the creation of roof structures. **Click "Book Now" for full course details**

Upcoming Course Dates

December 31 @ 12:00 am Book now

MC04S Pamir Posi Joist – Online student led

** PLEASE NOTE: Course date is for display purposes ONLY ** This student led course is intended for users who are already familiar with the MiTek MBA and Pamir software. Its aim is to cover in general terms all aspects associated with the usage of Posi Joist in floor situations and brief flat roof application with coverage of only the specific software tools required. **Click "Book Now" for full course details**

Upcoming Course Dates

December 31 @ 12:00 am Book now

— Final Assessment Only Courses —

MC02A Pamir Roof L1 – Final assessment only – Online

** PLEASE NOTE: Course date is for display purposes ONLY ** This course has been made available for those who have previously completed MiTek Pamir roof level 1 software training but were unable to submit a project for summary assessment to facilitate generation of their training certificate. **Click "Book Now" for full course details**

Upcoming Course Dates

December 31 @ 12:00 am Book now

MC04A Pamir Posi Joist – Final assessment only – Online

** PLEASE NOTE: Course date is for display purposes ONLY ** This course has been made available for those who have previously completed MiTek Pamir Posi Joist software training but were unable to submit a project for summary assessment to facilitate generation of their training certificate. **Click "Book Now" for full course details**

Upcoming Course Dates

December 31 @ 12:00 am Book now

— Instructor Led Courses Delivered Remotely Online —

MC02R Pamir Roof Level 1 – Remote instructor led

This course introduces the key features of Pamir and is designed for those having little or no experience in running the MiTek software suite. **Click "Book Now" for full course details**

Upcoming Course Dates

July 12 @ 9:00 am Book now

MC02RW Pamir Roof Level 1 Workshop – Remote instructor led

This follow on course builds on the key features covered previously with hands on exercises culminating in a summary assessment. **Click "Book Now" for full course details**

Upcoming Course Dates

August 16 @ 9:00 am Book now

MC03R Introduction to Pamir for Posi-Joist – Remote instructor led

This one-day introductory course caters for those having little or no experience in running the MiTek software suite. Its aim is to cover in general terms, all of aspects associated with using Pamir for detailing Posi Joist in floor situations. The course is delivered at a pace where no student is left behind. **Click "Book Now" for full course details**

MC04R Pamir Posi-Joist 1 Day – Remote instructor led

This one-day course is intended for users who are already familiar with the MiTek MBA and Pamir software. Its aim is to cover in general terms all aspects associated with the usage of Posi Joist in floor situations with coverage of only the specific software tools required. **Click "Book Now" for full course details**

MC06R Pamir EC5 Design – Remote instructor led

The aim of this short broad based online course (duration approx. 120 minutes) is to cover all of the setup and software related issues relative to EC5. **Click "Book Now" for full course details**

Upcoming Course Dates

August 25 @ 9:30 am Book now

— Instructor Led Courses at MiTek —

MC02 Pamir Roof Level 1 – MiTek office

This course introduces the key features of Pamir and is designed for those having little or no experience in running the MiTek software suite. **Click "Book Now" for full course details**

MC02W Pamir Roof Level 1 Workshop – MiTek office

This follow on course builds on the key features covered previously with hands on exercises culminating in a summary assessment. **Click "Book Now" for full course details**

MC03 Introduction to Pamir for Posi-Joist – MiTek office

This one-day introductory course caters for those having little or no experience in running the MiTek software suite. Its aim is to cover in general terms, all of aspects associated with using Pamir for detailing Posi Joist in floor situations. The course is delivered at a pace where no student is left behind. **Click "Book Now" for full course details**

Upcoming Course Dates

July 19 @ 9:00 am Book now

MC04 Pamir Posi-Joist 1 Day – MiTek office

This one-day course is intended for users who are already familiar with the MiTek MBA and Pamir software. Its aim is to cover in general terms all aspects associated with the usage of Posi Joist in floor situations with coverage of only the specific software tools required. **Click "Book Now" for full course details**

Upcoming Course Dates

July 20 @ 9:00 am Book now

MC05 Pamir Roof Level 2 – MiTek office

This is a two-day course for the intermediate to advanced truss designer who currently uses the MiTek Pamir software. The course is designed to increase productivity by covering a deeper range of program functions with particular attention being paid to set-up and advanced tools. **Click "Book Now" for full course details**

Upcoming Course Dates

August 23 @ 9:00 am Book now

— Instructor Led Courses Delivered Onsite at Customer (Subject to mutual agreement) —

MC02X Pamir Roof Level 1 – Onsite instructor led

This course has been made available for a specific customer who is receiving onsite MiTek Pamir Roof software training and will need to submit a project for summary assessment to facilitate generation of their training certificate. **Click "Book Now" for full course details**

MC04X Pamir Posi Joist – Onsite instructor led

This course has been made available for a specific customer who is receiving onsite MiTek Pamir Posi Joist training and will need to submit a project for summary assessment to facilitate generation of their training certificate. Its aim is to cover in general terms all aspects associated with the usage of Posi Joist in floor situations with coverage of only the specific software tools required. **Click "Book Now" for full course details**