Loading Events

← Back to Events

MiTek UK

+ Google Map
Grazebrook Industrial Park
Dudley,
West Midlands
DY2 0XW
United Kingdom
+44(0) 1384 451400 http://www.mitek.co.uk

October 2019

PAMIR Roof Level 1 (191008)

8 October @ 9:00 am - 10 October @ 5:00 pm BST
MiTek UK, Grazebrook Industrial Park
Dudley,
West Midlands
DY2 0XW
United Kingdom
+ Google Map

Part 1 of 2 - Pamir Roof Level One:  Scope: This two-part introductory course, spread over 3 weeks is designed for those having little or no experience in running the MiTek software suite. Continuous assessment is used to gauge the attendees understanding of the points being covered. Delivery: In-house Prerequisites: Completion of the Introduction to Trusses course or a minimum of three months’ prior hands on design experience. Content: – Part 1 – This 3 day hands-on course takes the…

Find out more »

PAMIR Introduction for Posi-Joist (191015)

15 October @ 9:00 am - 5:00 pm BST
MiTek UK, Grazebrook Industrial Park
Dudley,
West Midlands
DY2 0XW
United Kingdom
+ Google Map

Pamir Introduction for Posi: Scope: This one-day introductory course caters for those having little or no experience in running the MiTek software suite. Its aim is to cover in general terms, all of aspects associated with using Pamir for detailing Posi Joist in floor situations. The course is delivered at a pace where no student is left behind therefore; existing intermediate to advanced Pamir users should not attend. Continuous assessment is used in place of a summary test to gauge…

Find out more »

PAMIR Posi-Joist 1 Day (191016)

16 October @ 9:00 am - 5:00 pm BST
MiTek UK, Grazebrook Industrial Park
Dudley,
West Midlands
DY2 0XW
United Kingdom
+ Google Map

PAMIR Posi 1 Day: Scope: This one-day course is intended for users who are already familiar with the MiTek MBA and Pamir software. Its aim is to cover in general terms all aspects associated with the usage of Posi Joist in floor situations with coverage of only the specific software tools required. Continuous assessment is used in place of a summary test to gauge the attendees understanding of the points covered. Delivery: In-house Prerequisites: Minimum of three months’ prior hands…

Find out more »

PAMIR Roof Level 2 (191023)

23 October @ 9:00 am - 24 October @ 5:00 pm BST
MiTek UK, Grazebrook Industrial Park
Dudley,
West Midlands
DY2 0XW
United Kingdom
+ Google Map

Pamir Roof Level Two: Scope: This is a two-day course for the intermediate to advanced truss designer who currently uses the MiTek Pamir software. The course is designed to increase productivity by covering a deeper range of program functions with particular attention being paid to set-up and advanced tools. Delivery: In-house Prerequisites: Minimum of six months’ prior hands on experience using the MiTek Pamir software. Continuous assessment is used in place of a summary test to gauge the attendees’ understanding…

Find out more »

PAMIR Roof Level 1 Workshop (191029)

29 October @ 9:00 am - 30 October @ 5:00 pm GMT
MiTek UK, Grazebrook Industrial Park
Dudley,
West Midlands
DY2 0XW
United Kingdom
+ Google Map

Part 2 of 2 – Workshop Session (2 Days) This two-day follow–up course is designed to expand each users’ ongoing ability to use and understand the Pamir program, via a series of assisted exercises, supported question and answer sessions and feature demonstrations. A summary assessment is used to gauge the attendees’ understanding of the program.   Prerequisites: Completion of the Pamir Roof level 1 course (part 1) or a minimum of three week prior hands on Pamir software design experience.…

Find out more »

November 2019

PAMIR Roof Level 1 (191105)

5 November @ 9:00 am - 7 November @ 5:00 pm GMT
MiTek UK, Grazebrook Industrial Park
Dudley,
West Midlands
DY2 0XW
United Kingdom
+ Google Map

Part 1 of 2 - Pamir Roof Level One:  Scope: This two-part introductory course, spread over 3 weeks is designed for those having little or no experience in running the MiTek software suite. Continuous assessment is used to gauge the attendees understanding of the points being covered. Delivery: In-house Prerequisites: Completion of the Introduction to Trusses course or a minimum of three months’ prior hands on design experience. Content: – Part 1 – This 3 day hands-on course takes the…

Find out more »

PAMIR Introduction for Posi-Joist (191113)

13 November @ 9:00 am - 5:00 pm GMT
MiTek UK, Grazebrook Industrial Park
Dudley,
West Midlands
DY2 0XW
United Kingdom
+ Google Map

Pamir Introduction for Posi: Scope: This one-day introductory course caters for those having little or no experience in running the MiTek software suite. Its aim is to cover in general terms, all of aspects associated with using Pamir for detailing Posi Joist in floor situations. The course is delivered at a pace where no student is left behind therefore; existing intermediate to advanced Pamir users should not attend. Continuous assessment is used in place of a summary test to gauge…

Find out more »

PAMIR Posi-Joist 1 Day (191114)

14 November @ 9:00 am - 5:00 pm GMT
MiTek UK, Grazebrook Industrial Park
Dudley,
West Midlands
DY2 0XW
United Kingdom
+ Google Map

PAMIR Posi 1 Day: Scope: This one-day course is intended for users who are already familiar with the MiTek MBA and Pamir software. Its aim is to cover in general terms all aspects associated with the usage of Posi Joist in floor situations with coverage of only the specific software tools required. Continuous assessment is used in place of a summary test to gauge the attendees understanding of the points covered. Delivery: In-house Prerequisites: Minimum of three months’ prior hands…

Find out more »

PAMIR Roof Level 1 Workshop (191126)

26 November @ 9:00 am - 27 November @ 5:00 pm GMT
MiTek UK, Grazebrook Industrial Park
Dudley,
West Midlands
DY2 0XW
United Kingdom
+ Google Map

Part 2 of 2 – Workshop Session (2 Days) This two-day follow–up course is designed to expand each users’ ongoing ability to use and understand the Pamir program, via a series of assisted exercises, supported question and answer sessions and feature demonstrations. A summary assessment is used to gauge the attendees’ understanding of the program.   Prerequisites: Completion of the Pamir Roof level 1 course (part 1) or a minimum of three week prior hands on Pamir software design experience.…

Find out more »

January 2020

PAMIR Roof Level 1 (200107)

7 January 2020 @ 9:00 am - 9 January 2020 @ 5:00 pm GMT
MiTek UK, Grazebrook Industrial Park
Dudley,
West Midlands
DY2 0XW
United Kingdom
+ Google Map

Part 1 of 2 - Pamir Roof Level One:  Scope: This two-part introductory course, spread over 3 weeks is designed for those having little or no experience in running the MiTek software suite. Continuous assessment is used to gauge the attendees understanding of the points being covered. Delivery: In-house Prerequisites: Completion of the Introduction to Trusses course or a minimum of three months’ prior hands on design experience. Content: – Part 1 – This 3 day hands-on course takes the…

Find out more »

PAMIR Introduction for Posi-Joist (200114)

14 January 2020 @ 9:00 am - 5:00 pm GMT
MiTek UK, Grazebrook Industrial Park
Dudley,
West Midlands
DY2 0XW
United Kingdom
+ Google Map

Pamir Introduction for Posi: Scope: This one-day introductory course caters for those having little or no experience in running the MiTek software suite. Its aim is to cover in general terms, all of aspects associated with using Pamir for detailing Posi Joist in floor situations. The course is delivered at a pace where no student is left behind therefore; existing intermediate to advanced Pamir users should not attend. Continuous assessment is used in place of a summary test to gauge…

Find out more »

PAMIR Posi-Joist 1 Day (200115)

15 January 2020 @ 9:00 am - 5:00 pm GMT
MiTek UK, Grazebrook Industrial Park
Dudley,
West Midlands
DY2 0XW
United Kingdom
+ Google Map

PAMIR Posi 1 Day: Scope: This one-day course is intended for users who are already familiar with the MiTek MBA and Pamir software. Its aim is to cover in general terms all aspects associated with the usage of Posi Joist in floor situations with coverage of only the specific software tools required. Continuous assessment is used in place of a summary test to gauge the attendees understanding of the points covered. Delivery: In-house Prerequisites: Minimum of three months’ prior hands…

Find out more »

PAMIR Roof Level 1 Workshop (200128)

28 January 2020 @ 9:00 am - 29 January 2020 @ 5:00 pm GMT
MiTek UK, Grazebrook Industrial Park
Dudley,
West Midlands
DY2 0XW
United Kingdom
+ Google Map

Part 2 of 2 – Workshop Session (2 Days) This two-day follow–up course is designed to expand each users’ ongoing ability to use and understand the Pamir program, via a series of assisted exercises, supported question and answer sessions and feature demonstrations. A summary assessment is used to gauge the attendees’ understanding of the program.   Prerequisites: Completion of the Pamir Roof level 1 course (part 1) or a minimum of three week prior hands on Pamir software design experience.…

Find out more »

February 2020

PAMIR Introduction for Posi-Joist (200211)

11 February 2020 @ 9:00 am - 5:00 pm GMT
MiTek UK, Grazebrook Industrial Park
Dudley,
West Midlands
DY2 0XW
United Kingdom
+ Google Map

Pamir Introduction for Posi: Scope: This one-day introductory course caters for those having little or no experience in running the MiTek software suite. Its aim is to cover in general terms, all of aspects associated with using Pamir for detailing Posi Joist in floor situations. The course is delivered at a pace where no student is left behind therefore; existing intermediate to advanced Pamir users should not attend. Continuous assessment is used in place of a summary test to gauge…

Find out more »

PAMIR Posi-Joist 1 Day (200212)

12 February 2020 @ 9:00 am - 5:00 pm GMT
MiTek UK, Grazebrook Industrial Park
Dudley,
West Midlands
DY2 0XW
United Kingdom
+ Google Map

PAMIR Posi 1 Day: Scope: This one-day course is intended for users who are already familiar with the MiTek MBA and Pamir software. Its aim is to cover in general terms all aspects associated with the usage of Posi Joist in floor situations with coverage of only the specific software tools required. Continuous assessment is used in place of a summary test to gauge the attendees understanding of the points covered. Delivery: In-house Prerequisites: Minimum of three months’ prior hands…

Find out more »

PAMIR Roof Level 2 (200219)

19 February 2020 @ 9:00 am - 20 February 2020 @ 5:00 pm GMT
MiTek UK, Grazebrook Industrial Park
Dudley,
West Midlands
DY2 0XW
United Kingdom
+ Google Map

Pamir Roof Level Two: Scope: This is a two-day course for the intermediate to advanced truss designer who currently uses the MiTek Pamir software. The course is designed to increase productivity by covering a deeper range of program functions with particular attention being paid to set-up and advanced tools. Delivery: In-house Prerequisites: Minimum of six months’ prior hands on experience using the MiTek Pamir software. Continuous assessment is used in place of a summary test to gauge the attendees’ understanding…

Find out more »

March 2020

PAMIR Roof Level 1 (200303)

3 March 2020 @ 9:00 am - 5 March 2020 @ 5:00 pm GMT
MiTek UK, Grazebrook Industrial Park
Dudley,
West Midlands
DY2 0XW
United Kingdom
+ Google Map

Part 1 of 2 - Pamir Roof Level One:  Scope: This two-part introductory course, spread over 3 weeks is designed for those having little or no experience in running the MiTek software suite. Continuous assessment is used to gauge the attendees understanding of the points being covered. Delivery: In-house Prerequisites: Completion of the Introduction to Trusses course or a minimum of three months’ prior hands on design experience. Content: – Part 1 – This 3 day hands-on course takes the…

Find out more »

PAMIR Introduction for Posi-Joist (200310)

10 March 2020 @ 9:00 am - 5:00 pm GMT
MiTek UK, Grazebrook Industrial Park
Dudley,
West Midlands
DY2 0XW
United Kingdom
+ Google Map

Pamir Introduction for Posi: Scope: This one-day introductory course caters for those having little or no experience in running the MiTek software suite. Its aim is to cover in general terms, all of aspects associated with using Pamir for detailing Posi Joist in floor situations. The course is delivered at a pace where no student is left behind therefore; existing intermediate to advanced Pamir users should not attend. Continuous assessment is used in place of a summary test to gauge…

Find out more »

PAMIR Posi-Joist 1 Day (200311)

11 March 2020 @ 9:00 am - 5:00 pm GMT
MiTek UK, Grazebrook Industrial Park
Dudley,
West Midlands
DY2 0XW
United Kingdom
+ Google Map

PAMIR Posi 1 Day: Scope: This one-day course is intended for users who are already familiar with the MiTek MBA and Pamir software. Its aim is to cover in general terms all aspects associated with the usage of Posi Joist in floor situations with coverage of only the specific software tools required. Continuous assessment is used in place of a summary test to gauge the attendees understanding of the points covered. Delivery: In-house Prerequisites: Minimum of three months’ prior hands…

Find out more »

PAMIR Roof Level 1 Workshop (200325)

25 March 2020 @ 9:00 am - 26 March 2020 @ 5:00 pm GMT
MiTek UK, Grazebrook Industrial Park
Dudley,
West Midlands
DY2 0XW
United Kingdom
+ Google Map

Part 2 of 2 – Workshop Session (2 Days) This two-day follow–up course is designed to expand each users’ ongoing ability to use and understand the Pamir program, via a series of assisted exercises, supported question and answer sessions and feature demonstrations. A summary assessment is used to gauge the attendees’ understanding of the program.   Prerequisites: Completion of the Pamir Roof level 1 course (part 1) or a minimum of three week prior hands on Pamir software design experience.…

Find out more »
+ Export Events